Industrial Automation
High-Performance Servo Vane Pump ABT1T for Hydraulic Press Machines - China Suppliers & Factory
Model Representation
Main Features
1. Dowel pin type vane kits designation can make the pump with small resistance, low electronic, and with more energy saving.
2. Use outside leakage and leakage volume control designation low the oil temparature obviously. Based on the hydraulic components leakage volume, can adjust the oil leakage smartly, the pump pressure pulse is small at high pressure and low speed, the injection finished products will be more higher accuracy.
3. With the coordination of high pressure oil and vice spring structure, can make the pump run normally at low speed, can fit low and high speed shift, high and low pressure speed shift, right and left rotation shift etc working status of servo hydraulic system perfectly.
4. Double action and right-left rotation structure designation make the pump work more steadily, servo hydraulic system response more quickly.
5. High pressure, high speed structure and double cutting edges designation make the speed range more wide, and with more better polution resistance, and more longer working life.
6. Low noise stucture designation and wide range of flow, can be customized according to different requirements.
7. Use the cartridge kit installation structure, repairing only need change the cartridge kit, more convenient for repairing, and with more lower cost.
8. Double pump use one inlet port and two outlet ports, the structure is more compact with small installation space.
9. There are four directions each at inlet and outlet port, installation is more flexible.
ABT-T Model Representation
| Series | ml/r Flow code | Shaft type | Rotation | Outlet Positions | Design number | Sealing Level |
|---|---|---|---|---|---|---|
| ABT2T | -80 | -2 | R | 02 | -C | 1 |
| ABT1T | 6, 10, 16, 20, 25, 32, 40, 50, 55, 64 |
-1 -2 Keyed shaft |
(Viewed from shaft end of pump) R - Right hand for clockwise L - Left hand for counter - clockwise |
(Viewed from shaft end of pump) 00 - Opposite inlet port 01 - Inline with inlet 02 - 90° CCW from inlet 03 - 90° CW from inlet |
C |
1-S1, (Buna) NBR 2-S2, HNBR |
| ABT2T | 64, 80, 100, 110, 125, 140, 160 |
-2 Keyed shaft | ||||
| ABT3 | 160, 180, 190, 200 | -1 Keyed shaft |
Frequently Asked Questions
The dowel pin type vane kits designation allows the pump to operate with small resistance, low electronic consumption, and higher energy saving efficiency.
The pump utilizes outside leakage and leakage volume control designations to lower the oil temperature obviously. It adjusts the oil leakage smartly based on the hydraulic components leakage volume, which minimizes pump pressure pulse at high pressure and low speed.
Yes, with the coordination of high pressure oil and vice spring structure, the pump runs normally at low speed and perfectly fits working statuses of servo hydraulic systems like low/high speed shift, high/low pressure speed shift, and right/left rotation shift.
The pump uses a cartridge kit installation structure. When repairs are needed, you only need to change the cartridge kit, making maintenance more convenient and lower in cost.
The double pump design utilizes one inlet port and two outlet ports, which creates a more compact structure to save installation space.